Bertazzoni X304PIRBL User Manual

 

10

Bertazzoni ranges must be used only with the 
legs properly installed. 

Four height‐adjustable legs are shipped with the 
range in the polystyrene container situated over 
the appliance. 

Before installing the legs, position the appliance 
near its final location as the legs are not suitable 
for moving the appliance over long distances.  

After unpacking the range, raise it enough to 
insert the legs in the appropriate receptacles 
situated on the lower part of the appliance. 
Lower the range gently to keep any undue strain 
from legs and mounting hardware. If possible use 
a pallet or lift jack instead of tilting the unit. 

Adjust leg height to the desired level by twisting 
the inside portion of the leg assembly until the 
proper height is reached. Check with a level that 
the cooktop is perfectly level. 

 

 

 

To increase the clearance between the front edge 
of the worktop and the burners it is possible to 
install the worktop front guard shipped with the 
appliance.  

To install the front guard, hold it with the pointed 
edges looking up. Align the edges of the front 
guard with the appropriate receptacles in the 
bottom of the worktop and press firmly until the 
front guard is securely attached to the worktop. 

ATTENTION: once installed the front guard may 
only be removed by disassembling the worktop. 
Attempting to remove the front guard without 
disassembling the worktop will result in 
permanent damage to the worktop.