AMF SW-75 User Manual
MECHANICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
• The SW-75 is designed for today’s bread wrapping needs
• The SW-75 is designed to work in conjunction with the AMF Saber 75 Slicer and Mark 75
Bread Bagger to provide an efficient and comprehensive bread packaging system
• The SW-75 features a durable design focused on long term machine life including the only
solid frame design available
• The SW-75 incorporates the latest automated electronics including servo drives, AC drives,
electronic solenoids, PLC, and operator interface controls with recipe management and
diagnostic capabilities
Solid Frame
A solid frame was chosen over a stainless steel tubular
weldment for long term durability. We back this with
a 25-year warranty.
weldment for long term durability. We back this with
a 25-year warranty.
Simplicity
Only 4 of the original 9 cams remain. Most of the
linkages and adjustment points related to these cams
have been removed as well, resulting in greatly
improved access for maintenance or changeovers. The
Bottom Bed is now very similar to our Side Sealer
System, as there are no driven parts
linkages and adjustment points related to these cams
have been removed as well, resulting in greatly
improved access for maintenance or changeovers. The
Bottom Bed is now very similar to our Side Sealer
System, as there are no driven parts
Automatic Set-up and Monitoring
Servos, AC drives, Electric Solenoids and Pneumatics now
control most machine functions through a PLC.
These features dramatically simplify set-up and greatly
reduce operator input and adjustment. Critical set-up
systems are automatically measured and will not allow
the machine to run if they are out of specification.
Machine set-up can be accomplished 2 ways; by selection
of a product on the standard touch screen, or by
selection of a “Size to Pusher” option (Patent Pending).
Either way automatically measures the pusher plate, top
end and cross-feed and sets the correct positions.
control most machine functions through a PLC.
These features dramatically simplify set-up and greatly
reduce operator input and adjustment. Critical set-up
systems are automatically measured and will not allow
the machine to run if they are out of specification.
Machine set-up can be accomplished 2 ways; by selection
of a product on the standard touch screen, or by
selection of a “Size to Pusher” option (Patent Pending).
Either way automatically measures the pusher plate, top
end and cross-feed and sets the correct positions.
Remote Access
The control system is Ethernet / Modem ready for
remote troubleshooting and monitoring. Most machine
functions can be diagnosed remotely without the time
delay of dispatching a technician. Costs associated
with equipment service, and more importantly down
time, can be greatly reduced with this feature.
remote troubleshooting and monitoring. Most machine
functions can be diagnosed remotely without the time
delay of dispatching a technician. Costs associated
with equipment service, and more importantly down
time, can be greatly reduced with this feature.
Load Sharing and POD
Packaging on Demand (POD) is a feature to save machine
wear. If product is not present, it will sequentially shut
down or idle subsystems of the machine and “wake up”
when product is again present. In multiple unit
installations, product load to each machine can be
sensed. If one machine is idled, the remaining units can
increase speed to help absorb the load.
wear. If product is not present, it will sequentially shut
down or idle subsystems of the machine and “wake up”
when product is again present. In multiple unit
installations, product load to each machine can be
sensed. If one machine is idled, the remaining units can
increase speed to help absorb the load.
Film Feed
The standard paper feed system requires only the
operator to load the film and set the width. The rest of
the system is automatic and requires no operator
adjustments. The film spool sits on a pair of rollers that
are driven with an AC drive and controlled by a dancer
sensor. This is less complicated and less expensive than a
servo controlled unit that pulls the film through a series
of rollers.
An automatic film splicer is available as an option.
Production is never interrupted or slowed down during
film changes and the splice is hardly noticeable.
operator to load the film and set the width. The rest of
the system is automatic and requires no operator
adjustments. The film spool sits on a pair of rollers that
are driven with an AC drive and controlled by a dancer
sensor. This is less complicated and less expensive than a
servo controlled unit that pulls the film through a series
of rollers.
An automatic film splicer is available as an option.
Production is never interrupted or slowed down during
film changes and the splice is hardly noticeable.
Sealing
The patented Side Sealer System is undisputedly
recognized as the best in the industry. So much so, that
our customers have installed them on competitive
machines. With no driven parts, flexibility of
arrangement and very accurate temperature control, it
continues to lead the industry.
recognized as the best in the industry. So much so, that
our customers have installed them on competitive
machines. With no driven parts, flexibility of
arrangement and very accurate temperature control, it
continues to lead the industry.
FEATURES & BENEFITS
MODEL SW-75 BREAD WRAPPER
MODEL SW-75 BREAD WRAPPER
MODEL SW-75 BREAD WRAPPER
HEADQUARTERS
AMF Bakery Systems
2115 West Laburnum Avenue
Richmond, Virginia 23227
1-800-225-3771
or
804-355-7961
FAX : 1-804-342-9724
EUROPEAN OPERATION
West Park Ring Road
Leeds LS16 6QQ England
Tel. : 1132-787110
Fax : 1132-741415
sales@amfbakery.com
www.amfbakery.com
FOR MORE INFORMATION PLEASE CALL YOUR ACCOUNT MANAGER OR
AMF’s continuing engineering is constantly improving product performance. Consequently machinery specifications are subject to change without notice.
•
Four axis servo motion system
-Main drive
-Product Infeed (2)
-Underlap
-Product Infeed (2)
-Underlap
•
Light curtain guarding
•
Patented side sealer system
•
Shortened overhead and BW-7 type paddles
•
Roller bottom bed with integral bottom sealer
kit mounted immediately after the extension
plate (up front)
plate (up front)
•
Static bar eliminator system
•
Suction manifold for film retention
•
Powder coated steel frame
•
Packaging on demand system
•
Electro mechanical pusher
•
Preset, automatic set-up and/or automatic
set-up to pusher plate
•
Electro mechanical film feed system
•
Standard or opposite handed configuration
•
Electronic, torque overload systems
•
Allen Bradley, PLC temperature control system
•
Ethernet or Modem connection
•
Electronic cam motion linkage
•
Allen Bradley and Kebco AC drives
•
Allen Bradley MPL servo motors
•
Allen Bradley PanelView 600 color touchscreen
•
24 Volt control wiring
•
230 or 460 Volts, 60 Cycle, 3 Phase
DIMENSIONAL DRAWING
02/2005
Printed in Canada
PRODUCT SPECIFICATIONS
•
Rated for 60 PPM continuous operation (65 in temporary situation)
•
Loaf lengths: 5.75” to 14” standard (smaller and larger loaf set-up are available as an option)
•
Automatic film splicer
•
Wrapper by-pass conveyor system
•
Product transfer conveyor
•
Integral loaf turner
•
Nickel plated frame option
•
Smaller or larger loaf set-ups
•
Flexible layouts
MECHANICAL OPTIONS
COMPLETE WRAPPING SYSTEM
WITH BY-PASS OPTION AND
LOAF SPLITTER-TURNER
COMPLETE WRAPPING SYSTEM
WITH BY-PASS OPTION AND
LOAF SPLITTER-TURNER
Servo Motor Drive
Cam Drive
Side Sealer
Operator Interface
Automatic Film Splicer
Integral Loaf Turner