Avanti WC3201D User Manual

 

Appliance does not operate. 

Not plugged in. 
The circuit breaker tripped or a blown fuse. 
The power switch is put in “OFF” position. 

Appliance is not cold enough. 

Check the temperature control setting. 
External environment may require a higher 
setting. 
The door is opened too often. 
The door is not closed completely. 
The door gasket does not seal properly. 

Turns on and off frequently. 

The room temperature is hotter than normal. 
The door is opened too often. 
The door is not closed completely. 
The temperature control is not set correctly. 
The door gasket does not seal properly. 

The light does not work. 

Not plugged in. 
The circuit breaker tripped or a blown fuse. 
The bulb has burned out. 
The light switch is in the “OFF” position. 

Vibrations. 

Check to assure that the appliance is level. 

The Appliance  seems to make too much noise. 

The rattling noise may come from the flow of the 
refrigerant, which is normal. 
As each cycle ends, you may hear gurgling 
sounds caused by the flow of refrigerant in your 
appliance. 
Contraction and expansion of the inside walls 
may cause popping and crackling noises. 
The appliance is not level. 

The door will not close properly. 

The appliance is not level. 
The door was reversed and not properly installed. 
The gasket is dirty. 
The shelves are out of position.