Crane Merchandising Systems 675 User Manual

Page of 86
Monetary Setup
HDC II Programming Guide
6730018
15
July, 2003
SELECT CARD READER
1.
Press 
, then press 
 until the current card reader is shown in 
the display.  Press 
 to choose the desired card reader.
2.
Your choices are:  
NO CARD, DUMB CARD, or MDB CARD.
3.
Proceed to SELECT MONETARY OPTIONS, page 15, to customize 
your card reader choice.
NOTE
Depending upon your choice of card reader, some displays 
may not appear.
4.
CONTINUE.
SELECT MONETARY OPTIONS
Certain options can be selected, depending upon which monetary devices you 
have selected.
This function lets you:
1.
Press 
, then press 
 until the display shows 
CHANGE  X.XX.
X.XX represents the largest denomination coin or bill that will be changed 
without a purchase.  Any non-zero value here will return all escrowed coins.  
(Each coin denomination for which the coin mech has a tube is called an 
ESCROWED coin because it can be returned.)  When the coin return button 
is pressed, all coins inserted will be returned provided there is a coin mech 
tube for each of those coins, EXCEPT in the forced vend mode.
Some examples:
CHANGE 0.00  -  Forced vend; NO change returned without a purchase.
CHANGE  .25   -  Returns change without purchase if all accepted coins are 
less than .25 denomination or have a payout tube. Accep-
tance of a dollar coin will not cause a Force Vend if the 
coin mechanism has a dollar coin payout tube. Otherwise, 
accepting a dollar coin or accepting and stacking of a dol-
lar bill will cause a Force Vend.
CHANGE 1.00  -  Bills and non-escrowed coins less than or equal to $1.00 
will be changed without purchase.  All escrowed coins 
are returned.
Set change returning criteria
Set declining balance
Set currency acceptance on low 
change
Set overbuy options
Set last bill stacking options
Set card reader revalue options