Crane Merchandising Systems 675 User Manual
HDC II Programming Guide
View Machine Data
July, 2003
62
6730018
VIEW NUMBER OF TEST VENDS
(NOT SHOWN IF ZERO)
1.
Press
, then press
until the display shows
TST X. "X" is the
number of test vends.
2.
If desired, view this data by product and individual selection.
3.
CONTINUE.
VIEW NUMBER OF MUG VENDS
(NOT SHOWN IF ZERO)
(NOT SHOWN IF ZERO)
1.
Press
, then press
until the display shows
MUG X. "X" is
the number of mug vends.
2.
If desired, view this data by tray and individual selection.
3.
CONTINUE.
VIEW NUMBER OF ALT VENDS
(NOT SHOWN IF ZERO)
(NOT SHOWN IF ZERO)
An ALT VEND occurs when a smaller cup size is unavailable and the machine
vends the smaller selection by using a larger cup. The customer will get the larger
cup, but receive the smaller volume of product (at the small cup price). To view
the number of ALT VENDS,
vends the smaller selection by using a larger cup. The customer will get the larger
cup, but receive the smaller volume of product (at the small cup price). To view
the number of ALT VENDS,
1.
Press
, then press
or
until the display shows
ALT X . The “X” is the number of larger cups used to fill smaller
selections.
selections.
2.
CONTINUE.
VIEW MACHINE ID NUMBER
1.
Press
, then press
or
until the display shows
I.D. XXXXXX . The X's represent the 6-digit machine ID number.
2.
You can edit the machine ID number if the supervisor access code has been
previously entered (see "Gain Access To The Supervisor Mode", PAGE 7).
previously entered (see "Gain Access To The Supervisor Mode", PAGE 7).
3.
CONTINUE.