Sterling A0567659 User Manual
SGB Batch Blender with Mitsubishi Controller
Page 25 of 118
2-2 Tools and Equipment Needed
You’ll need the following:
• Hand
tools
• Fork lift or overhead lift
• Wire, conduit, and fittings for wiring runs (if receptacle is not already in
• Wire, conduit, and fittings for wiring runs (if receptacle is not already in
place)
• Mounting bolts with nuts and washers
• Compressed air tubing and fittings
• Compressed air tubing and fittings
2-3 Mechanical Installation
Blenders may be mounted on the machine, a stand, or a mezzanine. Be sure it is
securely attached and additional bracing is used if necessary. The sections on
the following pages explain general installation rules.
securely attached and additional bracing is used if necessary. The sections on
the following pages explain general installation rules.
Read manual thoroughly before installing
blender.
blender.
Use approved safety straps or chains to lift the
blender at the marked lifting points.
blender at the marked lifting points.
2-4 Safety Considerations
The terms NOTICE, CAUTION, WARNING, and DANGER have specific
meanings in this manual. See Section 11 for a complete list of specific safety
warning information.
A NOTICE is used to indicate a statement of company policy directly or
indirectly related to the safety of personnel or protection of property.
indirectly related to the safety of personnel or protection of property.
A CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
avoided, may result in minor or moderate injury.
A WARNING indicates a potentially hazardous situation which, if not
avoided could result in death or serious injury.
A DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This word will be limited
to the most serious situation(s).
avoided, will result in death or serious injury. This word will be limited
to the most serious situation(s).