Euro-Pro EP91 User Manual

When using electrical appliances, basic safety precautions should always be 
followed, including the following:

9.

Do not use outdoors. 

10. Do not let cord hang over edge of 

table or counter or touch hot 
surfaces.

11. Keep hands and utensils away 

from moving blades or discs 
while processing food to reduce 
the risk of severe injury to 
persons or damage to the food 
processor.  A scraper may be 
used but must be used only when 
the food processor is not running.

12. Blades are sharp.  Handle 

carefully.  When handling the 
chopper blade always hold it by 
the plastic hub.

13. To reduce the risk of injury, never 

place cutting blades or discs on 
the base without first putting bowl 
properly in place.

14. Be certain cover is securely 

locked in place before operating 
appliance.

15. Never feed food by hand. Always 

use food pusher.

16. Do not attempt to by-pass the 

cover interlock mechanism.

17. Always operate food processor 

with the cover in place.

Fig. 14

Make sure that the unit is unplugged from power source and control 

button is on “OFF” before inserting or removing any attachments and 

before cleaning.

•

Never immerse the unit, cord or plug 
in water or any other liquid.

•

Clean the main unit with a damp 
cloth only.

•

Only the stainless steel blades can 
be washed in the dishwasher.

•

All other parts can be cleaned in 
warm sudsy water using regular 
dishwashing liquid.

•

If food has spilled over on to the 
main unit, use the pointy end of the 
spatula to clean the cracks and 
crevices of the base under the food 
processor bowl. (Fig. 14)

•

The double chopping blade can be 

used for chopping meat, fish, 

vegetables, cheese, etc. setting  

the speed to maximum.

•

For finer chopping, increase the 

length of time you process.

•

For coarser chopping, use the pulse 

button for a few seconds and monitor 

food texture.

•

Pre-cut larger pieces to make them fit 

into the feed tube.  When chopping 

hard foods (e.g. meat, cheese) cut 

into 1 “/2.4 cm cubes.

•

For shredding, place food horizontally 

into the feed tube, for slicing place the 

food vertically.

Your Food Processor has been 

designed with a unique safety system 

which prevents damage to the unit’s 

motor and drive system, should you 

inadvertently overload your appliance.  

The safety system will automatically cut 

the electric power to the appliance 

when the device senses an overload or 

excessive temperature in the motor or 

drive system.  Should this occur during 

use and the appliance stops 

functioning, follow the re-setting 

procedure below:
1.

Turn the “ON/OFF” speed control 

to the “OFF” position 

2.

Unplug the unit from the wall 

receptacle.

3.

Remove and empty the processor 

bowl. Ensure that no food is 

jamming the cutting blades or 

attachments.

4.

Allow the appliance to cool down 

for a minimum of 30 minutes.

5.

Re-install the processor bowl and 

re-plug appliance in the wall outlet.

6.

Proceed to use the appliance as 

before.  Should the appliance still 

fail to operate, turn the “ON/OFF” 

speed control to the “OFF” position 

and unplug from the wall outlet.  

Allow the appliance to cool down 

for an additional 1 to 2 hours.  After 

this time has passed, repeat the 

restart procedure, steps 5 and 6 

above.

1. Read all instructions before using 

the appliance.  It is suggested 
that you keep these instructions 
in a safe place for future 
reference.

2. Your voltage must correspond to 

the voltage printed on the bottom 
of the appliance.

3. To protect against electrical 

shock, do not immerse the motor 
housing (base), cord, or plug in 
water or other liquid.

4. Close supervision is necessary 

when the appliance is used by or 
near children.

5. Unplug appliance from outlet 

when not in use, before putting 
on or taking off parts and before 
cleaning.

6. Avoid touching moving parts at 

all times.

7. Do not operate the appliance with 

a damaged cord or plug, or after 
the appliance malfunctions, has 
been dropped or damaged in any 
manner.  Return the appliance to 
EURO-PRO Operating LLC for 
examination, repair, electrical or 
mechanical adjustment.

8. The use of attachments including 

canning jars not recommended 
by the manufacturer may cause 
fire, electric shock or injury to 
persons.

This appliance has a polarized plug (one blade is wider than the other). To 
reduce the risk of electrical shock, this plug will fit in a polarized outlet only 
one way.  If the plug does not fit fully in the outlet, reverse the plug. If it still 
does not fit, contact a qualified electrician. Do not modify the plug in any way.

REV. 03/03A