Estate TUD4700SQ User Manual

Page of 12
3
To avoid thumping/clattering noises during operation, load 
dishes so they do not touch one another. Make sure lightweight 
load items are secured in the racks. 
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse 
cycle. Do not use detergent.
Use automatic dishwashing detergent only. Add powder, liquid 
or tablet detergent just before starting a cycle.
Fresh automatic dishwasher detergent results in better 
cleaning. Store tightly closed detergent container in a cool, dry 
place.
The amount of detergent to use depends on: 
How much soil remains on the items - Heavily soiled loads 
require more detergent.
The hardness of the water - If you use too little in hard water, 
dishes won't be clean. If you use too much in soft water, 
glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon) 
[typical water softener water and some city water] 
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]
Depending on your water hardness, fill the Main Wash section 
of the dispenser as shown. Fill the Pre-Wash section to the 
level shown, if needed. 
NOTE: Fill amounts shown are for standard powdered detergent. 
Follow instructions on the package when using other dishwasher 
detergent. 
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying 
performance. Without rinse aid your dishes and dishwasher 
interior will have excessive moisture. The heat dry option will 
not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can dry as 
spots or streaks. They also improve drying by allowing water to 
drain off of the dishes during the final rinse.
Rinse aid helps to reduce excess moisture on the dish racks 
and interior of your dishwasher.
Check the center of the fill 
indicator cap. Clear means 
it needs filling.
Select a Cycle (cycles vary by model)
NOTE: Heavier cycles and options affect cycle length.
Pots and Pans
 – Use for heavily 
soiled, hard-to-clean items.
Heavy Wash 
 
Use for heavy food 
soil.
Normal
 – Use for normal food soil. 
The energy usage label is based on 
this cycle.
Rinse Only
 – (no options apply to 
this cycle) Do not use detergent. A 
rinse keeps food from drying on your dishes and reduces odor 
buildup in your dishwasher until you are ready to wash a full load.
Plate Warmer
 – Use to warm serving dishes or dinner plates.
Select Options (options vary by model)
A high temperature option boosts the water temperature high 
enough to enhance cleaning. 
A delayed start option offers the choice to start the dishwasher 
automatically at a later time. 
A heated dry option should be used for best drying of dishes. 
A no heat dry option can be used to save energy.
A reset option allows you to change option settings anytime 
during a cycle.
Start or Resume a Cycle
Run hot water at the sink nearest your dishwasher until the 
water is hot. Turn off water.
Push door firmly closed. The door latches automatically. Turn 
the cycle control knob to the desired cycle to start.
You can add an item anytime before the main wash starts. Lift 
up the door latch to stop the cycle. Open the door slowly and 
add the item. Close the door firmly until it latches. The 
dishwasher resumes the cycle.
When loading silverware, always place sharp 
items pointing down and avoid “nesting” as 
shown. 
STEP 2
A. Cover
B. Main Wash section
C. Cover latch
D. Pre-Wash section
A
B
C D
Harder
Water
Softer
Water
Hard Water/
Heavy Soil
Softer Water/
Lighter Soil
Main Wash
Pre-Wash
STEP 3
STEP 4
OR