Melitta GV09 User Manual

Fig. 4

Fig. 3

Fig. 2

with running water and dry them carefully.

We recommend you not to use detergents

so as to avoid altering the aroma of the

coffee. For normal cleaning we recommend

you to avoid taking the heat  resistant glass

out of the thermoplastic resin support.

In order to clean the filter perfectly, we

recommend you to disassemble it from

time to time and clean it thoroughly,

especially if the coffee maker has not been

used for a long time. Unscrew the filter by

turning it around its axis (E). Separate the

three pieces making up the filter and wash

them carefully with running water. Dry and

reassemble the filter as shown in figure 6.

SPARE PARTS

The following pieces are considered spare

parts. In the event of loss or breakage you

can obtain them from your dealer, quoting

the code number shown in brackets.

Container in heat  resistant glass for 8-cup

coffee makers (35741)

Mesh filter for 8-cup coffee makers
(GV09/RETE)

REPLACING THE HEAT  RESISTANT

GLASS

When replacing the glass we recommend

you to ALWAYS WEAR  PROTECTIVE

GLOVES.

Take the cover and filter out of the heat

resistant glass.

Before removing the heat  resistant glass,

leave the press-filter immersed hot soapy

water for a few minutes.

Turn the glass upside down and press down

on the heat  resistant from above.

ATTENTION: hold the press-filter as shown

in figure 6.

Make sure you insert the new glass with

the lip positioned correctly (Figure 7).