Keurig KB31 User Manual

7

SECTION 3  

Buttons & Indicators 

(does not illuminate)             

Press to turn the Brewer power on and off.

Flashing Blue

 — Fill the Cold Water Reservoir with 

cold water until it reaches just under the rim of the 
desired level – 6, 8, or 10 ounces of the Water Level 
Guide. 

Flashing Blue

   — The blue light flashes when the 

minimum water amount of 6 ounces has been 
poured into the Cold Water Reservoir. After adding 
your desired amount of water (10 oz. maximum), 
lower the Cold Water Reservoir Lid. The light will 
continue to flash until you lift the Brewer Handle.

Flashing Blue

   — Indicates you are ready to brew. 

Press the BREW Button.

Flashing Red – Indicates water is heating. 
(approximately 2 minutes)

Solid Red – Indicates brewing and dispensing of 
beverage has begun.

When the brewing process is complete, the Add Water 
Indicator light will appear. At this point you can begin 
making the next beverage, or you can power off.

As a safety feature, your Brewer will automatically 
shut off at any stage when it is idle for longer than 90 
seconds. Press the Power Button to restart. If it shut 
off while the BREW Button was flashing blue, lift and 
lower the Brewer Handle to reset.

A red float will appear when the Drip Tray is almost 
full. Carefully slide Drip Tray out and empty contents 
into the sink.

BREW

BREW

BREW