Bunn soft heat server 1.75 Gallon User Manual

3

USER NOTICES 

 

The notices on this server should be kept in good condition.  Replace unreadable or damaged labels.

28167 020107

NOTE - Bunn-O-Matic recommends CASCADE

®

 dishwashing detergent for thorough cleaning.  DO NOT use 

bleach.

 

1.  Turn the entire lid assembly one-quarter turn counterclockwise to remove it for daily dishwasher cleaning.

2.  Remove retainer cap (A), ball (B) early models only, the inlet tube assy (D) and ball (C) from the lid  for 

cleaning (See illustration at left). They are removed by unscrewing in a counterclockwise direction.

3.  Clean the airvent (E) on the bottom of the lid assembly with the supplied brush  (#26367.0000) (See illustra-

tion at right).

E

A

B

C

D

P1377

P861

4.  After  cleaning,  reassemble  the  lid  assembly,  being 

careful to reinstall all parts removed.

5.  Disassemble  the  faucet  for  thorough  cleaning. 

Clean  the  faucet  shank  with  the  supplied  brush 

(#00674.0000).

6.  Clean  the  sight  gage  with  the  supplied  brush 

(#00675.0000).

7.  Clean all other surfaces with a damp cloth rinsed in 

any mild, non-abrasive, liquid detergent.

8.  Thoroughly rinse the entire server after cleaning.

9.  Fill with brew temperature water and leave full over-

night.

NOTE - Empty the water from the server before brewing.

#26186.0000

#28056.0000

#26178.0001

#28151.0000