Bunn Dual TF DBC User Manual

Page 13

 

This screen will be shown when the brewer is ready 

for use. The screen displays the water temperature 
in the tank. When the water in the tank reaches the 
correct set temperature, the display will change from 
HEATING to READY TO BREW.

This switch can be set to prevent access to the 

programming levels of the brewer. Once all the cor-
rect brew settings are programmed, the operator can 
set the switch to the "DISABLE" position to prohibit 
anyone from changing the settings.

 

This function allows the operator to prevent or 

allow brewing if the water temperature is less than 
the set READY temperature.
 

To access this function screen press and hold the 

® symbol. Release the ® when the display reads:

 The 

YES or NO should be fl ashing. Select YES to 

prevent brewing if the water temperature is below the 
set READY temperature. Select NO to permit brewing 
at any water temperature.
 

When fi nished, press and release DONE. This 

will exit this function screen and return to the MAIN 
SCREEN on the display.

 

The programming of the brewer is divided into two levels. There is one function in Level 1. All other functions 

are accessed in Level 2.
 

 The following function screens are in order of appearance. Each screen will have instructions on how to 

access, and the procedures to program the various functions of the brewer.

 

To exit the programming mode at any time, press and release either of the ON/OFF switches located on the 

front switch panel. The display will return to the MAIN SCREEN.
 

If none of the fi ve programming switches are pressed within one minute during the setup of the brewer, 

the programming of the function screen that is being set will be exited and the display will return to the MAIN 
SCREEN.
 

Always remember to place a container and funnel under the sprayhead when operating the brewer during the 

set-up of PULSE BREW, CALIBRATE FLOW and testing the brew and bypass valves in SERVICE TOOLS/TEST 
OUTPUTS.

PROGRAM

ENABLE

DISABLE

PROGRAMMING 

SWITCH

P2424

READY TO BREW

WATER TEMP: 205°

Press here 

for NO

Press here 

for DONE

Press here 

for YES

BREW  LOCKOUT?

 NO 

DONE 

YES

35058.1 071205