Bunn Dual TF DBC User Manual

Page 31

This function allows the setting or modifi cation 

of the funnel locks to stay engaged after the end of 
a brew cycle. This ensures that the funnel cannot be 
removed until after the liquid has emptied out of the 
funnel.

Procedure to modify drip times:
Range: OFF to 10 minutes for all three batch sizes.

NOTE:  If the brewer is already in the DRIP TIMES 
screen, it is not necessary to follow steps 1 through 
9 in this section, but proceed directly to step 10.

1.  Press and hold the upper right hidden switch until 

the display reads UNITS. Release the switch. Press 
and release switch until the display reads REVIEW 
RECIPES.

2. Press YES to proceed. The display should now 

read NO-NAME LEFT, along with MODIFY, SHOW 
and NEXT.

3. Press 

and 

release 

NEXT to advance to the desired 

coffee name to be modifi ed.

4.  Press and release MODIFY.  The display should 

read BREW OZ. 

5.  Press and release DONE. The display should read 

3 BATCHES DONE?.

6.  Press and release YES. The display should now 

read % BYPASS. 

7.  Press and release DONE. The display should read 

3 BATCHES DONE?.

8. Press and release YES. The display should now 

read SET PULSE BREW. 

9. Press 

and 

release 

NO. The display should now read 

DRIP TIME, along with either the word OFF, or a 
time will be showing. A batch light should also be 
blinking.

10.  Using the (-) and (+), set the amount of time from 

when the brew solenoid shuts off to when drip-out 
occurs for that batch size.

NOTE: Set to OFF to prevent funnel locks from engag-
ing (to disable this function), for a particular batch 
size. To set to OFF, press and release (-) until OFF is 
displayed.