Bunn ICBB User Manual

Page 4

#03408.0000

#03409.0000

#00656.0000

This equipment must be installed to comply

with the International Plumbing Code of the

International Code Council and the Food

Code Manual of the Food and Drug Adminis-

tration (FDA). For models installed outside

the U.S.A., comply with the applicable

Plumbing /Sanitation Code.

#00986.0000

USER NOTICES

Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should be

kept in good condition. Replace any unreadable or damaged labels.

WARNING

• DO NOT OVERLOAD CIRCUIT.

• ALWAYS ELECTRICALLY GROUND

THE CHASSIS.

• DO NOT DEFORM PLUG OR CORD.

• FOLLOW NATIONAL AND LOCAL

ELECTRICAL CODES.

• KEEP COMBUSTIBLES AWAY.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE OR SHOCK HAZARD.

READ THE ENTIRE

OPERATING MANUAL BEFORE

USING THIS PRODUCT

#37881.0000

#00658.0000

To reduce the risk of electric shock,

do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power before servicing.

Risk of Fire. Use a UL listed grounding

type attachment plug, rated 125/250
Vac, 30 A, 1 phase, 4 conductor. Plug
to be selected and installed only by
qualified service personnel.

#38125.0000

Risk of Fire. Use a UL listed grounding

type attachment plug, rated 125/208
Vac, 30 A, 1 phase, 4 conductor. Plug
to be selected and installed only by
qualified service personnel.

#38125.0001

41581 120408

#00985.0000

FOR USE ONLY ON AN

INDIVIDUAL BRANCH

CIRCUIT RATED 20 AMPS

• FILL WATER TANK

BEFORE ENERGIZING

• DO NOT OVERLOAD

CIRCUIT

• KEEP AWAY FROM

COMBUSTIBLES

• DO NOT DEFORM

PLUG OR CORD

• FAILURE TO COMPLY

RISKS EQUIPMENT

DAMAGE, FIRE OR

SHOCK

• BREWER ENERGIZED

UNLESS UNPLUGGED

SEE

INSTRUCTIONS

WARNING

#06064.0000

#34056.0001

120/208V
120/240V

120V

For 120/208V or 120/240 volt operation,
replace Power Supply Cord only with
Bunn-O-Matic part number 01699.0000.

CAUTION

#34072.0000

#29710.0011

Optional Field Wiring

120/208-240 V, 13.8-16.8 A, 2900-4050 W

1PH, 3-Wire + GND, 60HZ

Incorrect programming could result in accidental dispens-

ing of HOT LIQUID.

Trained personnel are to follow instructions provided for

software programming.

Use of additional graphic layer requires disabling of

appropriate switches.

Read all instructions for additional graphic layer prior to

installing and programming.

! WARNING

#39175.0000