3M 800af-s User Manual
22
Operation
(Continued)
Figure 3-9 – Box Size Set-Up
Figure 3-10 – Box Size Set-Up
Figure 3-9
Place box at infeed end of machine and push into
machine until it is taken away by drive belts.
machine until it is taken away by drive belts.
Figure 3-10
Adjust compression rollers. Run box through
machine and stop when adjacent to compression
rollers. Move compression rollers in to press box top
flaps firmly together. Restart machine to exit box.
machine and stop when adjacent to compression
rollers. Move compression rollers in to press box top
flaps firmly together. Restart machine to exit box.
•
To reduce the risk associated with pinch,
entanglement, and impact hazards:
−
Keep away from moving belts and
pneumatically controlled kicker
pneumatically controlled kicker
WARNING
•
To reduce the risk associated with pinch,
entanglement, and impact hazards:
−
Keep hands clear of the upper head support
assembly as boxes are transported through
the machine
assembly as boxes are transported through
the machine
−
Keep hands, hair, loose clothing, and jewelry
away from moving belts and taping heads
away from moving belts and taping heads
CAUTION
•
To reduce the risk associated with
mechanical and electrical hazards:
−
Turn electrical and air supply off and
disconnect before performing any
adjustments, maintenance or servicing the
machine or taping heads
disconnect before performing any
adjustments, maintenance or servicing the
machine or taping heads
WARNING
•
To reduce the risk associated with pinch
hazards:
−
Keep hands, hair, loose clothing, and jewelry
away from box compression rollers when box
is passing through machine
away from box compression rollers when box
is passing through machine
CAUTION