Sunrise Global CM250 IP User Manual
PC-IP Software
User’s Manual
24
Time & Date - The time and date displayed on this screen are
from your PC’s internal clock. If they are not correct, you will
need to update your PC’s date and time according to the
instructions for your PC (right click on the time displayed in the
Windows™ tool bar). The time and date are in the format
hh:mm:ss (24 hour time) and mm, dd, yy. The clock in the Install
Profiler is set in 24-hr time. Highlight the current entry; enter the
new time in the entry box and click on the Send button to confirm
the change. When a connection is established with the Install
Profiler, the time and date are automatically checked and the
user is prompted to automatically update the time and date if they
do not agree.
from your PC’s internal clock. If they are not correct, you will
need to update your PC’s date and time according to the
instructions for your PC (right click on the time displayed in the
Windows™ tool bar). The time and date are in the format
hh:mm:ss (24 hour time) and mm, dd, yy. The clock in the Install
Profiler is set in 24-hr time. Highlight the current entry; enter the
new time in the entry box and click on the Send button to confirm
the change. When a connection is established with the Install
Profiler, the time and date are automatically checked and the
user is prompted to automatically update the time and date if they
do not agree.
Backlight Timer - The backlight timer default is Enabled. The
Enabled option will automatically turn off the backlight after
three minutes of operation if no keys are pressed on the Install
Profiler. To change the current entry, select the desired option
from the pull-down menu and go on to the next item or click on
the Send button to update the Install Profiler.
Enabled option will automatically turn off the backlight after
three minutes of operation if no keys are pressed on the Install
Profiler. To change the current entry, select the desired option
from the pull-down menu and go on to the next item or click on
the Send button to update the Install Profiler.
Power Down Timer - The Power Down Timer default option
is Enabled. This option will power the unit down after a 3-minute
period of inactivity. When Disabled is selected the unit will
remained powered on until turned off manually with the Power
button. To change the current entry, select the desired option
from the pull-down menu and go on to the next item or click on
the Send button to update the Install Profiler.
is Enabled. This option will power the unit down after a 3-minute
period of inactivity. When Disabled is selected the unit will
remained powered on until turned off manually with the Power
button. To change the current entry, select the desired option
from the pull-down menu and go on to the next item or click on
the Send button to update the Install Profiler.
PC Emulator - The CM500 IP can emulate a cable modem and
a PC by requesting a second routable IP address through a
second DHCP process. This is required when any of the FTP
features are used.
a PC by requesting a second routable IP address through a
second DHCP process. This is required when any of the FTP
features are used.
FTP Configure - Enables the user to download configuration
Setup files from an FTP site to update settings or setup when
moving from one network to another.
Setup files from an FTP site to update settings or setup when
moving from one network to another.
Communications Setup
The Communications setup configures the PC’s serial port that
is used to communicate with the Install Profiler. The user may
select the serial port and set the data rate.
is used to communicate with the Install Profiler. The user may
select the serial port and set the data rate.
Edit Serial Port Rate - The serial port rate may be configured
to enable the user to reset the communication data rate on the
Install Profiler or to disable the user’s ability to change the
configuration.
to enable the user to reset the communication data rate on the
Install Profiler or to disable the user’s ability to change the
configuration.