Bravetti 10 WATTS User Manual

Remove all packing materials and 
manuals form inside your new gel 
canister ice cream maker.
Wash each part of the unit which 
touches the ingredients, such as the 
Stirring Paddle, Lid, and the Ice Cream 
bucket.  Parts should be washed with 
warm water and a mild dish washing 
detergent and wiped completely dry. Do 
NOT use abrasive cleaners to clean as 
these may damage your appliance. 
Power head may be wiped clean with a 
damp cloth. Do NOT clean appliance in 
dishwasher.

•

Double insulated freezer canister.
Double insulated walls keep the 
freezer canister colder for longer 
periods and for better freezing results. 
The gel inside these double walls 
provides thorough and even 
freezing throughout use.

•

See through cover with feeder hole.
The see through cover allows you to 
keep an eye on the freezing process. 
The convenient feeder hole allows 
you to add ingredients without having 
to stop the unit to do so.

The most important step in making 
frozen desserts, is making sure that the 
freezer canister is completely frozen. 
The Bravetti Gel Canister Ice Cream 
Maker features a double walled 
insulated freezer canister for perfect 
frozen desserts every time. To freeze 
your canister, wrap it in a large 
resealable freezer bag and place it 
upright in the coldest part of your 
freezer. Using a resealable freezer bag 
prevents ice crystals from forming on 
the freezer canister. The length of time 
to properly freeze the freezer canister 
depends on how cold your freezer 
temperature is. To make sure that your 
freezer canister is properly frozen, you 
should not hear any gel moving within 
the freezer canister when you shake it.

FREEZER TEMP

APPROX. FREEZING TIME

-22° F / -30° C

8-9 Hours

-13° F / -25° C

12-13 Hours

0° F / -18° C

20-22 Hours

5° F / -15° C

24 Hours or more

Your ice cream maker can make up to 1 
1/2 quarts of ice cream. Due to an 
increase in volume when freezing the 
ingredients, you should not exceed 1 
quart of liquid ingredients. If you are using 
your own recipes, adapt the volume of the 
mixture not to exceed this amount.

1.  Place the freezer canister into the 

coldest part of your freezer the day 
before. See chart for approximate 
freezing time.

2.  Make sure that the On/Off button is in 

the "Off" position.

3.  To assemble the unit, insert the drive 

unit into the cover until it locks in 
place.  The two tabs on the bottom of 
the drive unit will lock into the cover. 
(Fig. 1) 

Fig. 1

3.  Insert the paddle extender into the 

paddle (Fig.2) and then insert the 
paddle into the drive unit. (Fig. 3)

Fig. 2

Fig. 3

4.  Remove the freezer canister from the 

freezer.

5.  Place drive unit with the cover on the 

freezer canister. Make sure that all 
the locking tabs are aligned. Rotate the 
cover clockwise slightly so that the tabs 
lock in place. (Fig. 4)

9.  To add ingredients after the 

freezing process has started, 
slowly add them through the feeder 
hole.

10.  To avoid overheating the motor, 

the direction of the rotation will 
change when the mixture becomes 
too thick. If the direction of the 
rotation continues to change, the 
mixture is completely prepared. 
Turn the unit off.

11.  Remove the cover with the paddle 

from the ice cream mixture. Use 
only rubber, plastic or wooden 
utensil to serve or remove from the 
freezer canister.  Metal utensils 
may damage the freezer canister.

12.  To further harden the ice cream, 

you may place the freezer  canister 
in the freezer for a short period of 
time (no longer than thirty minutes). 
For longer freezing time. You 
should empty the ice cream in an 
airtight container.

Fig. 4

6.  Insert the plug into the power outlet and 

start the unit right away. This will prevent 
the paddle from freezing onto the freezer 
canister.

7.  Pour the prepared ice cream mixture 

through the feeder hole into the freezer 
canister. (Fig. 5)

Fig. 5

Important:  It is very important that the freezer 

canister be used immediately after 
being taken out of the freezer as it 
starts to thaw once it is removed 
from the freezer.

8.  Leave the unit on for approximately 20-40 

minutes or until the mixture reaches the 
desired consistency. Do not turn the unit 
"Off" during use as the mixture may freeze 
and prevent the paddle from turning.

The freezer canister may be washed in 
warm water with a mild dishwashing  
detergent then dried thoroughly.
To separate the freezer canister from 
the upper and lower rings for washing, 
press on the release button and lift the 
upper ring first. Then remove the lower 
ring by sliding it off the freezer canister. 
To replace the upper and lower rings 
after the freezer canister is completely 
dry, slide on the lower ring first aligning 
the hole for the release button with the 
arrow on the freezer canister. Then 
insert the upper ring making sure that 
the two rings snap together.
Do NOT wash any part in a dishwasher.
Do NOT use sharp utensils, scouring 
pads or abrasive cleansers to clean the 
freezer canister.
The drive unit may be cleaned with a 
damp cloth. Never immerse the drive 
unit in water or any other liquid.
Never place the freezer canister in the 
freezer if it is still wet. Always make 
sure that the freezer canister is 
completely dry before placing in the 
freezer. 
The storage lid may be washed with 
warm water and a mild dishwashing  
detergent then dried thoroughly.