Cornelius 3 User Manual
Viper Service Manual
Publication Number: 621360041TBSER
- 36 -
© 2010, IMI Cornelius Inc.
System Menu
The System menu is used during production to set up the unit. It also allows the
technician to view and change the number of barrels, the number of compres-
sors and the number of pressure sensors present in the sytem, as shown in Fig-
ure 29.
technician to view and change the number of barrels, the number of compres-
sors and the number of pressure sensors present in the sytem, as shown in Fig-
ure 29.
The description of these items is shown in Table 32.
NOTE: Changing these values to a number that doesn’t match the
physical number of items in the system generates errors or turns off
some of the equipment present in the system.
physical number of items in the system generates errors or turns off
some of the equipment present in the system.
When the individual fields are highlighted, the display buttons change. Refer to
Table 33 for a listing of the button functions for the various field selections.
Table 33 for a listing of the button functions for the various field selections.
Figure 29. System Screen
3
Select Motor Setup
Use the Up and Down arrows to highlight MOTOR
SETUP on the Maintenance menu.
4
Select the barrel
Use the Up and Down arrows to highlight the desired
barrel
5
Start calibration
Press the CAL button at the bottom of the Motor Setup
menu to start the calibration process.
6
The calibration cycle continues for five (5) minutes to allow
the gearbox to stabalize at temperature and ensure correct
callibration. At that time the motor stops and it is calibrated.
7
Complete the procedure
Press the BACK button at the bottom of the display to
return to the Maintenance menu.
Table 31
Step
Action
Procedure
Table 32
Display
Description
# OF BARRELS
This selection shows the number of barrels in the system and
allows the user to change the quantity.
# OF COMPRESSORS
This selection shows the number of compressors in the sytem.
Currently this number is fixed at one and cannot be changed.
SECURITY
This selection allows the user to turn security on or off.
CMP #X SENSORS
This selection allows the user to choose which pressure sensors
are read for the compressor.
Table 33
Option
Button 2
Button 3
Button 4
Button 5
# of Barrels
-
+
# of Compressors
-
+
Security
OFF
ON
SYSTEM
12:51P
MAR 04
# OF BARRELS 2
# OF COMPRESSOR 1
BACK - +
SECURITY OFF
CMP #1 SENSORS BOTH
CMP #X SENSORS LOW