Cornelius 3 User Manual

Viper Service Manual                                   

Publication Number: 621360041TBSER

- 42 -

© 2010, IMI Cornelius Inc.

There are no daily maintenance procedures required on the Viper unit other than 
normal cleanup of spills or overspray and emptying the drip tray. Normal equip-
ment maintenance intervals are listed in Table 33. It is recommended that a pre-
ventative maintenance procedure be performed every six (6) months. This 
procedure should include all of the maintenance items described in Table 33 and 
the following sections.

Only trained and certified electrical, plumbing and refrigeration technicians 
should service this unit. ALL WIRING AND PLUMBING MUST CONFORM TO 
NATIONAL AND LOCAL CODES.

Clean Air Filter

Monthly or more often, as necessary (See 

Table 34)

Check BRIX

Every six months or when changing syrup 

types (See “BRIX Setup Menu” on page 32.)

Seal Change

Every six months

Clean Condenser Coil

Every six months or as necessary

Sanitize Unit

Every six months or when changing syrup 

types

Check Water Filter

Every six months or if water pressure in the 

system is low.

Change or Rotate Scraper Blades

Every six months

Check for Leaks

Every six months

Clean BIB Connectors & check opera-

tion of syrup sold out switches

Every six months or when changing syrup 

types.

Check Clock Setting

Every six months or when changing to or 

from daylight savings time

Change caged o-ring on models w/ 

Motorman Valves.

Every six months or when changing syrup 

types.