Hearth & Home Technologies FI36SL User Manual

1/11

33734 Rev J

ImperIal gas log set InstallatIon InstructIons

a. listings and code approvals

The Imperial Series Gas Log Set has been tested and listed in the U.S. in accordance with

ansI Z21.60-1996 (Gas Log

Set). In Canada the Imperial Series Gas Log Set has been tested and approved in accordance with

cga 2.26-m96. It has

been listed by Underwriters Laboratories Inc. for installation and operation in the United States and Canada as described

in these Installation and Operating Instructions. All components are UL, AGA, CGA or CSA safety certified.
Check with your local building code agency prior to installing this appliance to ensure compliance with local codes, includ-

ing the need for permits and follow-up inspections. In the absence of local codes, comply with the

national Fuel gas

code, ansI Z223.1-latest edition in the U.S.; in Canada, the can/cga B149 Installation codes. If any assistance is

required during installation, please contact your dealer for more information or visit: www.hpba.org/staysafe.

HEATILATOR® is a registered trademark of Hearth & Home Technologies Inc.

WarnIng!

this heatilator appliance and its components are designed to be installed and operated as a system.

any alteration to or substitution for items in this system, unless allowed by these installation instruc-

tions, will void the underwriters laboratories listing and may void the product warranty. It may also

create a hazardous installation. read through these instructions thoroughly before starting your

installation and follow them carefully throughout your project.

WarnIng!

Do not use this appliance if any part has been under water. Immediately call a qualified service techni-

cian to inspect the appliance and to replace any part of the control system and any gas control which

has been under water.

B. description of the Imperial gas log set

the heatIlator® Imperial gas log set

consists of the following:

1. Burner/Hearth Assembly
2. Grate Assembly
3. Four Fiber Logs

optional components include:

RC-BATT-HTL Remote Control (M-Series only)

Imperial series nomenclature

tools and building supplies nor-

mally required for installation:

Pliers

Phillips screwdriver

Tape measure

Crescent wrenches

Non-corrosive leak-check solution

note: The illustrations and diagrams used throughout

these installation instructions are not drawn to

scale.

Fi42ml

logset order code number

Imperial Series Log Set

36” Log Set

42” Log Set

Intermittent Pilot

Safety Pilot Manual Valve

No Suffix

Natural Gas

Propane Gas