Fujioh FDK-03A Leaflet

INSTALLATION MANUAL

DUCTLESS KIT

READ AND SAVE THESE INSTRUCTIONS.

FUJI INDUSTRIAL CO.,LTD .

Keep this manual in a convenient place for future reference.

www.fujioh.com

    030583

FIG 1

FIG 2

FIG 3

FIG 5

FIG 6

FIG 7

SOFFIT

GRILL

DUCT TAPE

 (NOT INCLUDED)

BRACKET

(NOT INCLUDED)

GRILL

ELBOW

3-1/4" x 10"

DUCT

 3-1/4" x 10" x 2'

SCREWS (2)

< NAME OF PARTS > 

CHARCOAL FILTER

CABINET

POWER UNIT

LINER

FIG 4

SOFFIT

DUCT TAPE

(NOT INCLUDED)

SCREW

CHARCOAL

FILTER

3-1/4"x10" DUCT

ELBOWS

GRILL

3-1/4"x10"

DUCT

Fuji Industrial USA,Inc. 

16300 Christensen Rd, #212  Seattle, WA 98188

      1-888-547-9880

< The cross section> 

Finally, please install wood 

hood.

Please confirm contents in the above figure first. 

The charcoal filter should be replaced every three to 

six months, depending on the amount of cooking that 

is done.

NOTE

The liner and the power unit are 

completely installed.

Please refer to each installation 

book for the installation method.

Assemble the duct and the 

elbow temporarily, and decide 

the location of the grill.

Adjust length by cutting the duct 

to preferred length. 

Cut a rectangular hole for the 

grill in the soffit when the 

location of the grill is decided. 

Remove the protection seal of 

the grill. 

Attach the elbow to the wall 

or soffit. 

Attach the grill with the 

screws provided to the soffit. 

Please refer to cross section 

FIG4 for detailed assembly.

Do the taping to each joint 

with duct tape.

When installing without a 

soffit, please refer FIG5

Do not use screws to join the duct parts. 

Be careful not to expand the hole too much, and be 

careful not to damage soffit etc.

CAUTION

The charcoal filter is placed 

on the backside of the slot 

filter and it is reinstalled in 

the unit. 

Note do not place the 

charcoal filter over screw 

hole.

BACKSIDE

FLANGE

ALUMINUM SLOT FILTER