GE JV347* User Manual

Drive a mounting screw (from the hardware packet)
partway into each center of the narrow neck of the
keyhole slots marked on the cabinet bottom.

An optional Power Cord Connection Kit, model
JXHC1, is available at extra cost from your GE
supplier for installation using a standard 3-prong,
grounded wall outlet. Follow the Installation
Instructions packed with the kit to connect the
power cord to the range hood.

If using optional Power Cord Kit JXHC1,

feed the power cord through the hole in the top
cabinet while raising the hood. Loop any excess
length of cord and tie away with a suitable tape 
or tie.

Cabinet

7

3

⁄

4

″ 

3-prong 
wall outlet 
(if using cord
connection)

1

1

⁄

4

″ 

1

3

⁄

4

″ dia. clearance hole 

for optional power
supply location

C

L

Lift the hood into position and feed the house
wiring through the wiring knockout.

Slide the hood back against the wall. Tighten
the mounting screws. Be sure the screw heads
are in the narrow neck of the keyhole slot.

Keyhole (4)

Mounting 
screw (4)

DO NOT PUSH ON FAN BLADE. Pushing

on the blade may cause it to interfere with other
hood parts.

On 7

″ round installations, attach the 7″ duct 

with sheet metal screws through the holes in 
the alignment ears.

Use duct tape to make joints secure and air tight.

Duct tape

Attachment ear tabs

7

″ round duct