GE JV634 User Manual

C. When cutting or drilling into wall or ceiling,

 not damage electrical wiring and other

hidden utilities.

 fans must always be vented to

If this unit is to be installed over a tub or

shower, it must be marked as appropriate
for the application.

Use this unit only in the manner intended

by the manufacturer. If you have any questions,

contact the manufacturer.

 

Before servicing or cleaning 

 switch

power off at service panel and lock service

panel to prevent power 

 being switched

on accidentally.

● 

Never leave surface units unattended   high

For general ventilating use only. 

 not use

settings. 

 causes smoking and greasy

to exhaust hazardous or explosive materials

 that may ignite and spread if hood is

and vapors.

used. Use surface unit heat settings recommended
by 

 manufacturer and adequate-size utensils.

 Never use your cooking appliance for warming,

or heating the room. The electrical wiring of 

 Have it installed and properly grounded by a

range hood may not withstand the 

qualified technician in accordance with the

excessive 

installation instructions.

● 

Keep the hood clean and clean grease filter or

● 

Have the installer show you the location of

the hood circuit breaker or fuse and mark it for

replace combination filter as recommended to
maintain good venting and to avoid grease fires.

easy reference.

● 

 the time to read our suggestions for best use.

Keep 

 filters and grease laden

surfaces clean.

 

 ON when cooking

at high heat.

Installation work and electrical wiring must be

done by qualified person(s) in accordance with

C. Use high range settings on range only

 applicable codes and standards, including

when necessary. 

 oil slowly   low

 construction.

to medium setting.

combustion airflow needed for safe

Don’t leave range unattended when cooking.

operation of fuel-burning equipment maybe

Always use cookware and utensils appropriate

affected by this unit’s operation. Follow the

for the type and amount of food being prepared.

heating equipment manufacturer’s guideline and

safety standards such as those published by the
national Fire Protection Association 
and 

 American Society for Heating

Refrigeration and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

GE Quality Product