Emerson I-0021 User Manual

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

If you press the 

88 

 -key or the 

→

→

 -key in the line "System configuration and diagnostics..."

of the "Main Menu", you will change to the following display:

From the menu "System configuration" you can change to several submenus to set up the
system parameters of the platform or of the MLT analyzer. Besides you can set up or
control the software and hardware configuration of the control module or the analyzer
modules.
In the following table you will find a short overview about the contents of the menus and
where you will find their description in this manual:

⇒ 

Calibration of all analyzer modules in a
common process

∗ 

See
Supplement!

⇒ 

Error messages of the control module
and analyzer modules' software

∗ 

6.1 / p. 3 to 5

⇒ 

Date and time setup of the control
module (platform or MLT analyzer)

∗ 

⇒ 

Setup of security codes for the different
operating levels

∗ 

⇒ 

Binding of analyzer modules with micro
processor controlled I/O modules, which
are connected with the platform

∗ 

⇒ 

System reset of the control module and
re-initializing of the network

∗ 

⇒ 

Overview of all modules connected to
the control module
(platform or MLT analyzer)

∗ 

Measure

Channel

Back...

TAG

37.50 ppm

-- System Configuration --

System calibration...

Date and time...
Security codes...
Network module binding...
System Reset...

System modules...
System tag:

Fisher-Rosemount

Diagnostic menus...