KitchenAid 9871780B User Manual

Page of 16
5
Cutout Dimensions
Clearance Dimensions
Electrical Requirements
Recommended Grounding Method
This compactor is for use on a single phase, 115-volt, 60 Hz, AC 
only 15- or 20-amp fused and properly grounded circuit and is 
equipped with a grounding plug as shown below. It is 
recommended that a separate circuit serving only this appliance 
be provided. 
This compactor must be grounded while in use to reduce the risk 
of electric shock. The compactor is equipped with a three-
conductor cord and 3 prong grounding-type plug to fit the proper 
grounding-type receptacle. The green (or green and yellow) 
conductor in the cord is the grounding wire. Never connect the 
green (or green and yellow) wire to a live terminal. 
A. Grounded eletrical outlet must be a minimum 
of 3" (7.6 cm) away from surrounding cabinets 
or nearby walls as shown. It can be placed 
either to the left or the right side of the 
compactor.
A. Leave 6" (15.2 cm) of clearance space to the right side of 
the compactor in order to remove the compactor bags. 
B. Leave 23" (58.4 cm) of clearance in front of the compactor 
in order to fully open or remove the compactor drawer.
A
24" min.
(61 cm)
34
¹⁄₄
" min.
(87 cm)
18" min.
(45.7 cm)
3" 
(7.6 cm)
15
¹⁄₄
" min.
(38.7 cm)
B
A
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.
Do not remove ground prong.