Everpure CGHE1 User Manual
CGHE1 Installation
& Operating Guide
& Operating Guide
Faucet Compatibility
Tools and Safety Equipment you may need (not provided)
Only “Open Vent” faucets function with a instant hot water dispenser tank.
Connecting a standard faucet will damage the tank and void the warranty.
2 mounting bracket screws
(and 2 plastic anchors if
attaching to drywall)
(and 2 plastic anchors if
attaching to drywall)
1
/
4
" (6.4 mm)
O.D. copper
tubing.
tubing.
Materials required (not provided)
Components
tank mounting
bracket
bracket
tank
When you purchase the Everpure
®
Commerical
Grade Instant Hot Water tank, contents include:
quick-connect
fitting
fitting
Shut-Off valve
with “T” fitting
(EV312120)
with “T” fitting
(EV312120)
• ruler or measuring tape
• pliers
• hand or electric drill
• small drill bit for starter holes
• pliers
• hand or electric drill
• small drill bit for starter holes
• 1
3
/
8
" drill bit - if no sink
hole exists
• safety glasses
• bucket or pan
• bucket or pan
• open-end wrench(es)
• gloves
• tubing cutter
• gloves
• tubing cutter
EVERPURE INST
ANT HOT W
A
TER DISPENSER
(Connections must meet all local codes and ordinances.)
This hot water dispenser produces instant hot water of approximately 190°F (88°C) as dispensed
from the faucet.
from the faucet.
This product is not intended to produce a continuous flow of hot water. The standard model will
produce up to 60 cups of water per hour at approximately 190°F (88°C). Due to high water
temperature, for safety reasons, the tank is not under pressure. Consequently, there is a slight
delay of water flow after the faucet has been activated. This is normal and indicates that the
expansion chamber is functioning properly.
produce up to 60 cups of water per hour at approximately 190°F (88°C). Due to high water
temperature, for safety reasons, the tank is not under pressure. Consequently, there is a slight
delay of water flow after the faucet has been activated. This is normal and indicates that the
expansion chamber is functioning properly.
IMPORTANT INFORMATION
560H486P01 REV E
quick-connect fitting
with filter and cap
with filter and cap