Sony 2 User Manual

  

 Chapt

er

 16

 

Eng

inee

ring
 S
e

tu

p

290

Simple Connection of the MKS-8080/8082 AUX Bus Remote Panel

To carry out simple connection of the MKS-8080/8082 AUX Bus Remote 
Panel, use the following procedure.
For settings on the MKS-8080/8082, refer to the section “Making the Setting 
With Buttons (Setup Function)” in the Operation Manual for the MKS-8080/
8082.

Carry out initialization of the MKS-8080/8082 settings.
This can be done on the MKS-8080/8082 separately.

Set the MKS-8080/8082 station number in the range 2 to 17.
This can be done on the MKS-8080/8082 separately.

Set the S-BUS data link primary station to the CCP-8000 Center Control 
Panel.

Set the STATION ID switches S903 on the front of the CA-45 board in the 
SCU SLOT 1 to 001 (switch 1 only to the OPEN position).

In the Engineering Setup> System> Initialize menu, select PNL, and carry 
out a reset.

This carries out a restart, and when the restart is completed connection to 
the MKS-8080/8082 is possible.

In the Engineering Setup>Router/Tally> Router menu, set the position of 
the DVS-9000 system in S-BUS space.

Select the setting from SWR1 and SWR2, and set each of Source, 
Destination, and Level to 1.

As a result of making the simple connection, the MKS-8080/8082 operates in 
AUX bus mode, and the settings are the following factory defaults.