Sony 2 User Manual
63
DME Special Effect Operations
Cha
p
te
r 11
DME Op
er
at
ion
s
s
3
To make wave settings for melting part, press [Border] and set the
following parameters.
following parameters.
a) Set when Lock is on.
b) Set when Lock is off.
b) Set when Lock is off.
To stop the waves in the melting part
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
With each press, the waves alternately stop and start moving again.
To select the shape of the part beginning to melt
Press [Form] and set the following parameters.
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
Use the following procedure.
1
Press [Pixel], turning it on.
2
Set the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Amp
Amplitude of waves
0.00 to 100.00
2
Freq
Frequency of waves
0.00 to 100.00
3
Offset
a)
Amount of wave phase offset
−
16.000 to +16.000
4
Speed
b)
Direction and speed of waves
−
100.00 to +100.00
5
Slant
Slant of border
−
100.00 to +100.00
Knob
Parameter
Adjustment
Setting values
1
Form
Waveform
1 to 8
a)
Knob
Parameter
Adjustment
Setting values
1
Density
Degree to which image
disappears
disappears
0.00 to 100.00
2
Random
Degree to which pixel positions
become more randomized
further from the center
become more randomized
further from the center
0.00 to 100.00