Heatcraft Refrigeration Products H-IM-68 User Manual
11
Diagram 4. Typical Piping
In-Warranty Return Material Procedure
Material may not be returned except by permission of
authorized factory service personnel of Heatcraft Inc.
Refrigeration Products Division in Stone Mountain, Georgia.
A “Return Goods” tag will be sent to be included with the
returned material. Enter the required information on the tag in
order to expedite handling at our factories and prompt issuance
of credits. All parts shall be returned to the factory designated
on the “Return Goods” tag, transportation charges prepaid.
Refrigeration Products Division in Stone Mountain, Georgia.
A “Return Goods” tag will be sent to be included with the
returned material. Enter the required information on the tag in
order to expedite handling at our factories and prompt issuance
of credits. All parts shall be returned to the factory designated
on the “Return Goods” tag, transportation charges prepaid.
The return of a part does not constitute an order for
replacement. Therefore, a purchase order must be entered
through your nearest Heatcraft Refrigeration Products
representative. The order should include part number, model
number and serial number of the unit involved.
through your nearest Heatcraft Refrigeration Products
representative. The order should include part number, model
number and serial number of the unit involved.
Following our careful inspection of the returned part and if
it is determined that the failure is due to faulty material or
workmanship, credit will be issued on customer's purchase order.
workmanship, credit will be issued on customer's purchase order.