Glen Dimplex Home Appliances Ltd BE817 User Manual
REPLACING THE INTERIOR LIGHT BULB (See diagram)
Should the light fail to work, proceed as follows.
1. Switch off at the socket outlet and pull out the mains plug.
• You may find it useful to remove shelves for easy access.
1. Switch off at the socket outlet and pull out the mains plug.
• You may find it useful to remove shelves for easy access.
2. Use a flat tipped screwdriver to remove the light diffuser cover by inserting
the blade in the centre between diffuser and thermostat housing.
the blade in the centre between diffuser and thermostat housing.
3. First check that the bulb hasn’t worked loose by ensuring it is screwed
securely in the holder. Replace the plug and switch on. If the bulb works, replace
the light cover by pushing upwards to locate the lugs.
securely in the holder. Replace the plug and switch on. If the bulb works, replace
the light cover by pushing upwards to locate the lugs.
4. If the light still fails to work, switch off at the socket outlet and pull out the
mains plug. Replace the bulb with a new 15 watt (max) screw cap (SES) bulb.
mains plug. Replace the bulb with a new 15 watt (max) screw cap (SES) bulb.
5. Carefully dispose of the burnt-out light bulb immediately.
Replacement light bulb can easily be obtained from a good local electrical or
DIY store.
Replacement light bulb can easily be obtained from a good local electrical or
DIY store.
13