Viking F20481 User Manual
31
7
8
Open doors as wide as possible.
Firmly push tube 5/8” into the connector. Use lines on
the tube as a guide for full insertion. NOTE: If water line
tube end is damaged, cut off 5/8” before reconnecting.
If leaking occurs, reconnect the line.
9
Replace toe grille. Align the toe grille mounting clips
with the lower cabinet slots. Push the toe grille firmly
with the lower cabinet slots. Push the toe grille firmly
until it snaps into place.
30
1
2
Install hinges with Phillips screws.
Place hinge side of refrigerator doors on hinge pins.
3
4
Install top hinges loosely with 5/16” hex head screws.
While holding refrigerator doors upright, tighten down
top hinges with 5/16” hex head driver.
5
6
Reconnect two-pin connector.
Replace top hinge covers.
Door Reinstallation
(Side-By-Side)