GE 10-95 CG User Manual
CAUTION: Before replacing your oven light bulb,
disconnect the electrical power to the range at the
main fuse or circuit breaker panel. Be sure to let
the light cover and bulb cool completely.
disconnect the electrical power to the range at the
main fuse or circuit breaker panel. Be sure to let
the light cover and bulb cool completely.
The oven light bulb is covered with a removable
glass cover that is held in place with a bail-shaped
wire. Remove the oven door, if desired, to reach
cover easily.
glass cover that is held in place with a bail-shaped
wire. Remove the oven door, if desired, to reach
cover easily.
To remove:
1. Hold a hand under the cover
so it doesn’t fall when
released. With fingers of the
same hand, firmly push back
the wire cover holder. Lift
off the cover.
released. With fingers of the
same hand, firmly push back
the wire cover holder. Lift
off the cover.
DO NOT REMOVE ANY SCREWS TO
REMOVE COVER.
REMOVE COVER.
2. Do not touch hot bulb with a wet cloth. Replace
bulb with a 40-watt household appliance bulb.
To replace cover:
1. Place it into the groove of the light receptacle. Pull
the wire forward to the center of the cover until it
snaps into place. When in place, the wire holds the
cover firmly. Be certain the wire is in the
depression in the center of the cover.
snaps into place. When in place, the wire holds the
cover firmly. Be certain the wire is in the
depression in the center of the cover.
2. Connect electrical power to the range.
CARE AND CLEANING
(continued)
Oven Shelves
Clean the shelves with
an abrasive cleanser or
steel wool. After cleaning,
rinse the shelves with
clean water, rinse and dry.
an abrasive cleanser or
steel wool. After cleaning,
rinse the shelves with
clean water, rinse and dry.
NOTE: The oven shelves may also be cleaned in the
self-cleaning oven. However, the shelves will darken
in color, lose their luster and become hard to slide if
cleaned during the self-cleaning cycle. Wipe the shelf
supports with cooking oil after self-cleaning to make
the shelves slide more easily.
self-cleaning oven. However, the shelves will darken
in color, lose their luster and become hard to slide if
cleaned during the self-cleaning cycle. Wipe the shelf
supports with cooking oil after self-cleaning to make
the shelves slide more easily.
Broiler Pan and Grid
After broiling, remove
the broiler pan and grid
from the oven. Remove
the grid from the pan.
Carefully pour out grease from the pan into a proper
container. Wash and rinse the broiler pan and grid in
hot water with a soap-filled or plastic scouring pad.
the broiler pan and grid
from the oven. Remove
the grid from the pan.
Carefully pour out grease from the pan into a proper
container. Wash and rinse the broiler pan and grid in
hot water with a soap-filled or plastic scouring pad.
The enamel grid and broiler pan may be cleaned in
the self-clean oven. However, to prevent heavy smoke
caused by self-cleaning the greasy soil in the pan, you
must first clean off the excess grease.
the self-clean oven. However, to prevent heavy smoke
caused by self-cleaning the greasy soil in the pan, you
must first clean off the excess grease.
If food has burned on, sprinkle the grid with
detergent while hot and cover with wet paper towels
or a dishcloth. Soaking the pan will remove
burned-on foods.
detergent while hot and cover with wet paper towels
or a dishcloth. Soaking the pan will remove
burned-on foods.
The broiler pan may be cleaned with a commercial
oven cleaner. If the grid is grey enamel, it can also be
cleaned with an oven cleaner. If the grid is chrome, do
not use an oven cleaner to clean it.
oven cleaner. If the grid is grey enamel, it can also be
cleaned with an oven cleaner. If the grid is chrome, do
not use an oven cleaner to clean it.
Do not store a soiled pan and grid anywhere in
the range.
the range.
Both the broiler pan and grid can also be cleaned in
the dishwasher.
the dishwasher.
How to Remove the Storage Drawer to Clean Under the Range
The area under the range can be reached easily for
cleaning by removing the bottom drawer. To
remove, pull the drawer out all the way, tilt up the
front and remove it. To replace, insert glides at the
back of the drawer beyond the stop on range glides.
Lift the drawer if necessary to insert easily. Let the
front of the drawer down, then push in to close.
cleaning by removing the bottom drawer. To
remove, pull the drawer out all the way, tilt up the
front and remove it. To replace, insert glides at the
back of the drawer beyond the stop on range glides.
Lift the drawer if necessary to insert easily. Let the
front of the drawer down, then push in to close.
Oven Light Replacement
Wire cover holder
34