Smeg A4-5 User Manual
Instructions for the User
74
11.2 Cleaning the hob components
Before carrying out any operation involving access to live parts,
disconnect the appliance from the electricity supply.
disconnect the appliance from the electricity supply.
11.2.1 Barbecue griddle plate
After leaving it to cool, remove the
barbecue plate by lifting it from the front as
shown here, taking care not to spill the
residues that have collected in the
channels at the sides. Clean it with an
ordinary detergent and a non-abrasive
sponge.
Take care not to spill the residues that
collect in the channel.
barbecue plate by lifting it from the front as
shown here, taking care not to spill the
residues that have collected in the
channels at the sides. Clean it with an
ordinary detergent and a non-abrasive
sponge.
Take care not to spill the residues that
collect in the channel.
11.2.2 Basin
To remove the basin underneath the
barbecue heating element:
1. Remove the griddle plate as
barbecue heating element:
1. Remove the griddle plate as
described in point 10.2.1;
2. Lift the heating element and
secure it by sliding the retainer to
the right (as shown here);
the right (as shown here);
3. Remove the basin using the two
handles and clean it with a
specific stainless steel detergent
and non-abrasive sponge.
specific stainless steel detergent
and non-abrasive sponge.
11.2.3 The pan stands
Remove the right-hand pan stands (griddle+fish burner) as shown here.
The left-hand pan stands do not have to be removed in any particular
order. Wash them in warm water with a non-abrasive detergent, taking
care to remove all deposits. Replace fitting first the side pan stand then
the griddle plate.
Remove the right-hand pan stands (griddle+fish burner) as shown here.
The left-hand pan stands do not have to be removed in any particular
order. Wash them in warm water with a non-abrasive detergent, taking
care to remove all deposits. Replace fitting first the side pan stand then
the griddle plate.