Humminbird LCR 3D User Manual
The diagnostic function is also very helpful during troubleshooting to determine where a
problem in the system lies. A "weak" beam is usually caused by an improper sensor installation,
however, if your sensor is mounted outside the hull, the problem is most likely in the sensor or the
LCR 3D itself.
however, if your sensor is mounted outside the hull, the problem is most likely in the sensor or the
LCR 3D itself.
Operating Frequency:
455 KHz
Power Requirement:
10 - 16 VDC
Power Cable Length:
48"
Sensor (standard):
SHS-9
Sensor Cone Angle:
45 degrees side-to
side
16 degrees front-to
back
Depth Ranges: 0 to 10', 20', 40',
60', 80' and 99'
Zoom Ranges: 10', 20' and 40'
Unit Construction:
Unit Construction:
high-impact
polycarbonate
housing
Unit Dimensions:
8 1/4" x 5 3/4" x 2"
Display:
super-twist liquid
crystal
Viewing Area:
3 " x 4 "
Matrix Configuration:
128 x 128 pixels