Lucent Technologies 5 User Manual

Issue 1

June 1997

System Components 

Page 3-44

Adjuncts 

Dial Dictation:
A device that requires contact closure 
can be used on LS/GS line jack only 
with UPAM.

Can be connected to:

LS or GS/LS trunk jack

008 OPT, 016 (Release 4.0 and later), or 012 T/R 
extension jack

MFM and MLX extension jack

GPA and analog extension jack

Cannot be connected to a QCC.

Requires UPAM to provide 48 VDC.

Direct Station Selector (DSS):
A maximum of two DSSs per operator 
console; 329A power supply required 
for console with two DSSs. 

Connects to DSS jack on MLX operator console 
only.

Door Phone:
Use system programming to designate 
phone to ring.

Connects to loop-start line/trunk jack.

Fax:
Must have touch-tone dialing if 
connected by MFM; rotary or 
touch-tone dialing can be used on T/R 
port. Industry-standard analog 
interface.

Can be connected to:

008 OPT, 016 (Release 4.0 and later), or 012 T/R 
extension jack

MFM and MLX extension jack

With MFM, device originates and receives calls 
independently of phone.

Cannot be connected to a QCC.

Group Calling Delay 
Announcements:
Industry-standard devices that provide 
disconnect and announcement 
features. Each calling group can have 
10 primary delay announcement 
devices and 1 secondary device

1

. 

Devices can provide delay 
announcements for more than one 
group.

Can be connected to:

008 OPT, 016 (Release 4.0 and later), or 012 T/R 
extension jack

MLX telephone with MFM and MLX extension 
jack (with MFM, device originates and receives 
calls independently of phone)

Analog multiline telephone with GPA and analog 
extension jack

Cannot be connected to a QCC.

Connects to analog multiline phones.

Connect to MLX/analog multiline phones.