Lucent Technologies 5 User Manual

Issue 1

June 1997

Removing/Reinstalling the Control Unit Cover 

Page E-2

Installing the Control Unit Housing 

5

Installing the control unit housing involves two tasks: installing the top cover and 
then installing the front cover.

This section contains instructions for both tasks.

5

To install the control unit top cover, see 

 and follow these steps:

1.

Be sure the cords have been pressed through the wire managers at the 
base of the modules.

2.

Hold the top cover with the hooks facing you.

3.

Engage the tabs at the rear of the top cover with the carrier.

4.

Lower the top cover so that the legs lock into the vents on the module.