Lucent Technologies 5 User Manual

Page of 429
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide  
555-650-118  
Issue 1
June 1997
System Components 
Page 3-2
Control Unit 
3
Inside the back of each carrier is a component called the 
backplane
, which holds 
the circuitry that makes it possible for the modules to “talk” to each other and for 
the processor module to handle the traffic among the modules.
Every system has a 
basic carrier 
that holds the following modules in its slots:
Power supply module (not numbered)
Processor module (slot 00)
Up to five line/trunk and extension modules (slots 01–05)
If you need more trunks and/or extensions than can fit in the basic carrier, you can 
connect up to two 
expansion carriers
 to the basic carrier. Like the basic carrier, 
each expansion carrier’s leftmost slot holds a power supply module; the remaining 
six slots hold line/trunk and extension modules. (The processor module in the 
basic carrier serves the expansion carriers too.) The six slots for line/trunk and 
extension modules in the expansion carriers are numbered as follows:
First expansion carrier (slots 06
11)
Second expansion carrier: slots (12
17)
Processor Module
3
The processor module is the “brains” of the system, a miniature computer that 
controls system features and diagnostics, as well as the traffic among the 
modules (see 
). The processor module provides three jacks, one for 
Station Message Detail Recording (labeled 
SMDR
), one for system programming 
and maintenance using a PC (labeled
 ADMIN
), and one for software maintenance 
by Lucent Technologies technicians only (this one is plugged shut)
.
The Personal Computer Memory Card International Association (PCMCIA) 
interface slot on the processor module is where you insert a PCMCIA memory 
card. A memory card is very similar to a floppy diskette used in a PC, but it is 
about the size of a credit card. There are different types of memory cards used 
with the system, each with a different label (see the next section for more 
information).
The processor module has a single-character display for numbers and symbols 
that help Lucent Technologies technicians to understand any problems with the 
system software and to maintain the system. The module also has a red light that 
indicates hardware failures.