Toshiba 4511 User Manual

e-STUDIO3511/4511 ADJUSTMENT

3 - 40

November 2003 © TOSHIBA TEC

Code

848

858

853

(1)

While pressing [0] and [5] simultaneously, turn the power ON.

(2)

Key in the codes and press the [START] button.

(3)

Key in the adjustment values. Acceptable values : 0 to 255. (To correct the value once keyed in,

press [CLEAR] button.)

(4)

Press the [ENTER] or [INTERRUPT] button to store the value in memory.

→ The equipment goes

back to the ready state.

(5)

Let the equipment restart and perform scanning job.

(6)

If the desired image has not been attained, repeat step (1) to (5).

3.7.4 Background adjustment (Color Mode)

The adjustment level of background center value is adjusted. The control value of background

adjustment button is automatically adjusted to the same level as the adjusted center value.

For example, when the control value of background adjustment key ranges from 0 to 6, the

background center value (-2 to +2) is used to be the range from 6 to 14 accordingly.

3.7.3 Background adjustment (Gray Scale Mode)

The adjustment level of background center value and the control of background adjustment button are

adjusted.

Item to be adjusted

Center value

Dark step value

Light step value

Remarks

The larger the value is, the background becomes darker. The smaller the

value is, the background becomes lighter.

Acceptable values: 0 to 255 (Default: 128)

The larger the value is, the image of the “dark” steps becomes darker.

Acceptable values: 0 to 255 (Default: 20)

The larger the value is, the image of the “light” steps becomes lighter.

Acceptable values: 0 to 255 (Default: 35)

Code

1070

1071

1072

Original mode

Text

Printed Image

Photo

Remarks

The larger the value is, the background becomes lighter.

Acceptable values: 0 to 50 (Default: 0)

(1)

While pressing [0] and [5] simultaneously, turn the power ON.

(2)

Key in the codes and press the [START] button.

(3)

Key in the adjustment values. Acceptable values : 0 to 50. (To correct the value once keyed in,

press [CLEAR] button.)

(4)

Press the [ENTER] or [INTERRUPT] button to store the value in memory.

→ The equipment goes

back to the ready state.

(5)

Let the equipment restart and perform scanning job.

(6)

If the desired image has not been attained, repeat step (1) to (5).

Before adjustment

After adjustment

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

-1

-2

-1

-2