Toshiba 4511 User Manual

e-STUDIO3511/4511 ADJUSTMENT

3 - 54

November 2003  ©  TOSHIBA TEC

1. When confirming and adjusting the gap between the developer sleeve and the doctor blade, insert

the gauges into the gap after rotating the developer sleeve so that its marking faces the doctor

blade.

2. While reattaching the black developer unit cover, set the latches securely.

Adjustment tool to use : Doctor-sleeve jig

(5)

Insert the gauge “0.50” of the doctor-sleeve

jig into the gap between the developer

sleeve and doctor blade and make sure that

the gauge can move smoothly in the front/

rear direction. In addition, confirm that the

gauge “0.60” cannot be inserted into the

gap.

Developer sleeve

Doctor-sleeve
 jig

Doctor blade

Adjusting procedure:

(1)

Take off the color developer unit from the

equipment.

(2)

Remove 2 screws and take off the

developer material cover. Then discharge

the developer material.

Screw

Screw

Developer material cover

(3)

Remove 4 screws and the toner-scattering

prevention seal holder.

Screw

Toner-scattering prevention
seal holder