Intel SE7501WV2 User Manual
SE7501WV2 Connectors
Intel® Server Board SE7501WV2 TPS
Revision
1.0
Intel reference number C25653-001
154
Table 87. Optional USB Connection Header Pin-out (J1D3)
Pin Signal
Name
Description
1
VREG_FP_USBPWR0
Front Panel USB Power (Ports 0,1)
2
VREG_FP_USBPWR0
Front Panel USB Power (Ports 0,1)
3
USB_FP_P0-
Front Panel USB Port 0 Negative Signal
4
USB_FP_P1-
Front Panel USB Port 1 Negative Signal
5
USB_FP_P0+
Front Panel USB Port 0 Positive Signal
6
USB_FP_P1+
Front Panel USB Port 1 Positive Signal
7 Ground
8 Ground
9 Key
10
USB_FP_OC0
Front Panel USB Overcurrent signal (Ports 0,1). This signal is not used
8.6.7 Floppy
Connector
The SE7501WV2 server board provides two separate interfaces to the floppy drive controller.
The first is a legacy 34-pin connector (J1G1), and the second is embedded in the high-density
100-pin floppy / front panel / IDE connector (J2G1).
The first is a legacy 34-pin connector (J1G1), and the second is embedded in the high-density
100-pin floppy / front panel / IDE connector (J2G1).
Note: Using both connectors in a common system is not supported.
The following tables detail the pin-out of the 34-pin legacy floppy connector.
Table 88. Legacy 34-pin Floppy Connector Pin-out (J1G1)
Pin Signal
Name Pin Signal
Name
1 GND
2 FD_DENSEL0
3 GND
4 Test
Point
5 KEY
6 FD_DENSEL1
7 GND
8 FD_INDEX_L
9 GND
10 FD_MTR0_L
11 GND
12 FD_DS1_L
13 GND
14 FD_DS0_L
15 GND
16 FD_MTR1_L
17 Test
Point
18 FD_DIR_L
19 GND
20 FD_STEP_L
21 GND
22 FD_WDATA_L
23 GND
24 FD_WGATE_L
25 GND
26 FD_TRK0_L
27 Test
Point
28 VCC
29 GND
30 FD_RDATA_L
31 GND
32 FD_HDSEL_L
33 GND
34 FD_DSKCHG_L