Intel SE7501WV2 User Manual
Configuration and Initialization
Intel® Server Board SE7501WV2 TPS
Revision
1.0
Intel reference number C25653-001
44
4.6 PCI I/O Subsystem
4.6.1 PCI
Subsystem
The primary I/O bus for the SE7501WV2 server board is the PCI subsystem, with three
independent PCI bus segments. The PCI bus complies with the PCI Local Bus Specification,
Rev 2.2. The P32-A bus segment is directed through the ICH South Bridge while the two 64-bit
segments, P64-B and P64-C, are directed through the P64H2 I/O Bridge. The following table
lists the characteristics of the three PCI bus segments.
independent PCI bus segments. The PCI bus complies with the PCI Local Bus Specification,
Rev 2.2. The P32-A bus segment is directed through the ICH South Bridge while the two 64-bit
segments, P64-B and P64-C, are directed through the P64H2 I/O Bridge. The following table
lists the characteristics of the three PCI bus segments.
Table 10. PCI Bus Segment Characteristics
PCI Bus
Segment
Voltage
Width
Speed
Type
PCI I/O Riser Slots
P32-A
5 V
32-bits
PCI 33 MHz
Peer Bus
–
P64-B
3 V
64-bits
PCI-X 100 MHz
Peer Bus
Supports full-length cards, 3.3V bus
P64-C
3 V
64-bits
PCI-X 100 MHz
Peer Bus
Supports low-profile cards, 3.3V bus
4.6.2
P32-A: 32-bit, 33-MHz PCI Subsystem
All 32-bit, 33-MHz PCI I/O for the SE7501WV2 server board is directed through the ICH South
Bridge. The 32-bit, 33-MHz PCI segment created by the ICH is known as the P32-A segment.
The P32-A segment supports the following embedded devices and connectors:
Bridge. The 32-bit, 33-MHz PCI segment created by the ICH is known as the P32-A segment.
The P32-A segment supports the following embedded devices and connectors:
•
2D/3D Graphics Accelerator: ATI Rage* XL Video Controller
•
ATA-100 controller: Promise Technology* PDC20277
Each of the embedded devices listed above can be disabled via a BIOS Setup option.
4.6.2.1
Device IDs (IDSEL)
Each device under the PCI hub bridge has its IDSEL signal connected to one bit of AD[31:16],
which acts as a chip select on the PCI bus segment in configuration cycles. This determines a
unique PCI device ID value for use in configuration cycles. The following table shows the bit to
which each IDSEL signal is attached for P32-A devices and the corresponding device description.
which acts as a chip select on the PCI bus segment in configuration cycles. This determines a
unique PCI device ID value for use in configuration cycles. The following table shows the bit to
which each IDSEL signal is attached for P32-A devices and the corresponding device description.
Table 11. P32-A Configuration IDs
IDSEL Value
Device
28
ATI Rage XL Video Controller
18
ATA-100 controller Promise Technology PDC20277
4.6.2.2 P32-A
Arbitration
P32-A supports three PCI masters (ATA Rage XL, Promise ATA-100 Controller, and the ICH3-
S).
S).
All PCI masters must arbitrate for PCI access, using resources supplied by the ICH.
The