Vermont Casting ODSHR42 User Manual

Page of 24
3
ODSHR  Outdoor Woodburning Fireplace
20002264
Safety Information
Description
The ODSHR Series (Super Hearth) fireplace is a clean-
faced, solid fuel, woodburning fireplace. 
Precautions
CFM Corporation fireplaces and component parts have 
been highly tested and will operate safely when installed 
in accordance with instructions provided in this manual. 
Carefully read and understand all instructions before 
beginning installation.
If you notice any damage to fireplace or component parts, 
immediately report damage to your Majestic Fireplaces 
dealer.
Only use CFM Corporation components or the warranty 
will be voided and a fire hazard may be created.
CFM Corporation warranty will be voided by and CFM 
Corporation disclaims any responsibility for the following 
actions:
•  Installation of any damaged fireplace or chimney 
component;
•  Modification of fireplace, chimney assembly or any 
component parts thereof; (except for chase flashings 
as detailed in the Chimney Top installation instruc-
tions).
•  Installation other than as instructed by CFM Corpora-
tion; or
•  Installation and/or use of any component part not 
manufactured or approved by CFM Corporation in 
combination or assembly with a CFM Corporation 
fireplace system, notwithstanding any independent 
testing laboratory or other third party approval of 
such component parts or accessory.
Any such action may possibly cause a fire hazard.
Consult local building codes to ensure that you are in 
compliance before installing the fireplace.
Fireplaces must be vented to the out-of-doors.
WARNING: To avoid the risk of damaging fireplace 
materials and increasing the risk of spreading a fire, 
do not use the fireplace to cook or warm food.
Do not obstruct or modify air inlets/outlets in any 
manner. 
Do not install combustible materials on any of the 
fireplace surround.
Burn only solid wood fuel or gas logs.
Do not install a solid fuel burning insert or other 
products not specified for use with this fireplace.
These fireplaces are not approved for installation in 
mobile homes.
This fireplace is not designed to be water tight. 
Therefore, when installing this unit against an exte-
rior wall, the wall must be finished before setting unit 
in place.
NOTE: This unit is intended for outdoor use in the United States using CF11 or SK chimney systems. The unit 
may be installed indoors, in the U.S. only, using CF11 chimney system only. This unit is intended for outdoor 
use in Canada using the SK chimney system only.
Drafts
The fireplace should not be located in areas that create 
drafts (ie: frequently opened doors and central heating air 
inlets/outlets) that hamper the normal flow of air into the fire.
Gas Logs
If you plan to install a gas log, the gas line should be 
installed before framing the fireplace. The gas line must 
be installed by a certified gas line installer.
Cleaning
There are three methods of cleaning the polished stain-
less steel of your outdoor fireplace;
1.  Warm, soapy water - to loosen any dirt film
2.  Glass cleaner with ammonia
3.  Stainless steel cleaner available at hardware stores
Regardless of which method is used, remember that any-
thing with too much abrasive may dull the finish.  
Proposition 65 Warning: Fuels used in gas, woodburning 
or oil fired appliances, and the products of combustion of 
such fuels, contain chemicals known to the State of Cali-
fornia to cause cancer, birth defects and other reproductive 
harm.
California Health & Safety Code Sec. 25249.6
ODSHR42
Listed
UL / ULc127
Standard for Factory Built Fireplaces
Unit: GH3SR0