Polycom 7000 User Manual
Superclustering
Polycom, Inc.
232
8 Log back in and verify that the Supercluster Status pane of the Dashboard shows the correct
number of servers and clusters, and there are no warnings.
9 Go to Network > RealPresence DMAs, verify that the status of each RealPresence DMA cluster is
Superclustered, and reassign territory responsibilities as needed.
To remove a cluster from the supercluster
1 Make sure that there are no calls on the cluster, and that all of its MCUs are out of service. See
2 Reassign all of the cluster’s territory responsibilities to a different cluster.
3 Go to Network > RealPresence DMAs. In the list, select the cluster you want to remove.
4 In the Actions list, select Remove from Supercluster.
5 When asked to confirm that you want to remove the cluster, click Yes.
3 Go to Network > RealPresence DMAs. In the list, select the cluster you want to remove.
4 In the Actions list, select Remove from Supercluster.
5 When asked to confirm that you want to remove the cluster, click Yes.
The selected cluster is removed from the supercluster. A dialog informs you when the process is
complete. If the cluster you removed is the one you’re logged in to, it logs you out and restarts.
6 Click OK to log out immediately, or simply wait.
7 Log into the system you removed and verify on the Supercluster Status pane of the Dashboard
that the system is no longer superclustered.
See also:
Note: Remove a cluster only while its servers are operational
If possible, remove a cluster only while its server or servers are on line. If you must remove a cluster
while one or both servers are off line, be aware that an offline server may be in an inconsistent state
when it’s brought back on line. If this occurs, the system attempts to auto-correct the situation. But if
the auto-correction steps fail, the only supported procedure for fixing a server in this state is to
re-install it from media.
If possible, remove a cluster only while its server or servers are on line. If you must remove a cluster
while one or both servers are off line, be aware that an offline server may be in an inconsistent state
when it’s brought back on line. If this occurs, the system attempts to auto-correct the situation. But if
the auto-correction steps fail, the only supported procedure for fixing a server in this state is to
re-install it from media.
Note: Restart your browser
You may need to restart your browser or flush your browser cache in order to log back into the system.
You may need to restart your browser or flush your browser cache in order to log back into the system.