Mitsubishi Electronics FX3G User Manual
340
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
Series
Programming Manual - Basic & Applied Instruction Edition
13 High-Speed Processing – FNC 50 to FNC 59
13.1 FNC 50 – REF / Refresh
Explanation of function and operation
1. 16-bit operation (REF and REFP)
1) When refreshing outputs (Y)
"n" points are refreshed from the output specified in
. ("n" must be a multiple of 8.)
- When this instruction is executed, the output latch memory is refreshed to the output status in the specified
range.
2) When refreshing inputs (X)
"n" points are refreshed from the input specified in
. ("n" must be a multiple of 8.)
- If the input information is turned ON approximately 10 ms (response delay time of the input filter) before the
instruction is executed, the input image memory turns ON when the instruction is executed.
- In X000 to X017
*1
, the response delay time of the input filter can be changed.
*1.
X000 to X007 in the FX
3G
/FX
3GC
.
→ For details, refer to "13.1.1 What should be understood before using the REF instruction".
D
Head
device
number
Number
of points
K8 (H8) or K16 (H10): Up to K256 (H100) (which is a multiple of 8)
Y000, Y010 or Y020: Up to the final output number
(whose least significant digit number is "0")
(whose least significant digit number is "0")
FNC 50
REF
n
D
Command
input
ON
ON
Image memory output (Y)
REF instruction (executed)
Output refresh
REF instruction + END processing
END instruction
processing (output)
processing (output)
ON
Improved response
delay time
delay time
Only END processing
Improved response
delay time
delay time
D
Head
device
number
Number
of points
K8 (H8) or K16 (H10): Up to K256 (H100) (which is a multiple of 8)
X000, X010 or X020: Up to the final input number
(whose least significant digit number is "0")
(whose least significant digit number is "0")
FNC 50
REF
n
D
Command
input