A&D HV-G Series User Manual
HV-G Instruction Manual Page 17
7.1.2
Type L with Batteries
Step 1 Install six new batteries. Refer to “5.1. Installing the batteries for Type L”.
Step 2 Ensure that the pan is empty.
Step 3 The scale turns on/off using the
ON/OFF
switch alternately.
Step 4 Check the accuracy of weighing. If you calibrate the scale, perform it after
warming up the scale for 30 minutes.
Step 5 Press the
ZERO
switch to display zero. (With nothing on the pan.)
Step 6 Place something on the pan gently.
Step 7 You can read the weight value after the stability mark is displayed.
Step 8 Remove the item from the pan.
Step 9 Turn the scale off using the
ON/OFF
switch.
Caution
Replace used dry cells with six new ones when
Replace used dry cells with six new ones when
BATT
is displayed.
Battery life is affected by the environmental temperature.
Remove batteries from the display unit when the scale is not to be used for a long
time. The batteries may leak and cause damage.
Remove batteries from the display unit when the scale is not to be used for a long
time. The batteries may leak and cause damage.