A&D HV-G Series User Manual

HV-G Instruction Manual Page 64

(a) Connect the cable between J2 and

J3 on the upper case (Item 1).

(b) Free the 2 pin cable on the lower

case (Item 2) and connect it to
CN1.

(c) Screw the upper case (Item 1) to

the lower case (Item 2) using the 4
screws (Items c).

(d) Secure the rear cover (Item 3) to

the lower case (Item 2) with the 2
lock screws.

(e)Secure the printer cover (Item 6 to

the upper case (Item 1).

a) Press 

ON/OFF

 key while holding the 

ZERO

 key pressed.

b) F1 will be displayed - press the 

MODE

 key.

c) F 9 0 will be displayed - press the 

RANGE

 key.

d) F 9 1 will be displayed - press the

 MODE

 key.

e) F10 will be displayed - press the 

F

 key

f) End will be displayed - press the 

MODE

 key.

g) Prepare the paper roll and open the printer cover.
h) While holding the 

F

 key, press the 

PRINT

 key and feed in the paper.

i)

Place a weight onto the scale and when the stable mark flashes press the

PRINT

 key.

If the printed weight is correct then the installation has been successful.