Epson 1810P User Manual

You can match the color of projected images when two or more 
projectors are being used to display images near each other. For each 
screen, you can set five levels of brightness and color correction.

1. Before starting, you may want to assign a numeric ID to each 

projector. This lets you use the remote control to select the 
projector you want to adjust. See page 33 for instructions.

To match the display colors as closely as possible, make sure that 
all the projectors are set to the same color mode before starting. 
See page 50 for instructions.

2. Press the 

Menu

 button on the remote control. You see the 

projector’s menu screen. 

3. Select 

Extended > Multi-screen

.

4. Start by setting the 

Adjustment Level

 to 

1

 for two projectors. 

Then use 

Brightness Correct.

 to match the darker projector to 

the lighter one. Press 

Enter

 to see the effects of your adjustments.

5. Next, adjust the brightness of Level 5 for the same two projectors. 

Match the brighter projector to the darker one.

6. Adjust and match the brightness of Levels 2, 3, and 4. 

7. Adjust and match the G/R color correction for all levels. Then 

adjust and match the B/Y correction for all levels. 

8. If you are using three or more projectors, repeat steps 4 through 7 

to match projector 3 to projector 2, then match projector 4 to 
projector 3, and so on.

User's Guide - 1810.book  Page 62  Monday, September 10, 2007  6:39 PM