Sony XM-5150GSX Specification Guide

Design and Specifications subject to change without notice.

•

 880W max power

•

 40W x 4 + 150W x 1 into 4W, 20Hz-20kHz, @ 0.04% THD

•

 60W x 4 + 180W x 1 into 2W, 20Hz-20kHz, @ 0.1% THD

•

 120W x 2 + 150W x 1 into 4W

• MOSFET Outputs
• MOSFET Power Supply
• Input Channel Selector (Front/Front + Rear)
• Variable F+R 50-300Hz Hi Pass, Sub 50-300Hz
   Low Pass Filter
• F+R RCA Inputs

•

 Indicates step-up

Circuit system 

OTL (output transformerless) circuit
Pulse power supply

Inputs 

RCA pin jacks

Outputs 

Speaker terminals

Speaker impedance 

2 – 8 W (stereo) 4 – 8 W (when used as a bridging amplifier)

Maximum outputs 

80 watts × 4 + 300 watts × 1 (at 4 W)

Rated outputs (supply voltage at 14.4 V) 
   5 Speakers: 

40 watts × 4 (50 Hz – 20 kHz, 0.04% THD, at 4 W)
+ 150 watts × 1 (20 – 300 Hz, 0.04% THD, at 4 W)
60 watts × 4 (50 Hz – 20 kHz, 0.1% THD, at 2 W) + 180 watts × 1 
(20 – 300 Hz, 0.1% THD, at 2 W)

    3 Speakers:

120 watts × 2 (50 Hz – 20 kHz, 0.1% THD, at 4 W)
+ 150 watts × 1 (20 – 300 Hz, 0.04% THD, at 4 W)

Frequency response 

5 Hz – 50 kHz ( +0 dB,  -3 dB)

Harmonic distortion 

0.005% or less (at 1 kHz, 4 W)

Input level adjustment range

0.2 – 6.0 V (RCA pin jacks)

High-pass filter 

50 – 300 Hz, –12 dB/oct

Low-pass filter 

50 – 300 Hz, –12 dB/oct

Power requirements 

12 V DC car battery (negative ground)

Power supply voltage 

10.5 – 16 V

Current drain 

at rated output: 42 A
Remote input: 1.0 mA

Dimensions 

Approx. 358 × 50 × 264 mm (w/h/d) (14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls

Mass 

Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories

Supplied accessories 

Mounting screws (4)

POWER OUTPUT AND TOTAL HARMONIC DISTORTION
40 watts/150 watts per channel minimum continuous average power into
4 ohms, 5 channels driven from 50 Hz to 20 kHz/20 Hz to 300 Hz
(subwoofer) with no more than 0.04% total harmonic distortion per Car
Audio Ad Hoc Committee Standards.