Toshiba Z300 User Manual
232
Switch Setting
Hardware setup information
Perform the following operations if the hardware setup informa-
tion is to be forcibly returned to the standard settings (CMOS
Clear):
tion is to be forcibly returned to the standard settings (CMOS
Clear):
1 Disconnect the AC power cable.
2 Remove the server panels, power supply unit and board for
wireless card.
3 Set the jumper switch PJ47 on the motherboard to 1-2 short.
PJ47:
1-2 short ... Clears the hardware data settings.
3-4 short... Standard (Defined data)
3-4 short... Standard (Defined data)
4 Install the board for wireless card, power supply unit and
server panels, and connect the AC power cable.
5 Turn on the server.
CMOS is cleared and the power is automatically turned off.
6 Disconnect the AC power cable.