Toshiba Z300 User Manual

39

If the system is used as it was configured at the factory, it was 
properly set up before shipment. However, if something optional is 
added to the system after shipment, or it is desired to change the 
operating condition properly for use, it is required to set up the sys-
tem once again. 
There are the following utilities prepared for setup of the system 
configuration.
See “System Configuration Setup” on page 138.

This utility software is designed to manage (set, store, etc.) the 
hardware resources of the server, for example: memory addresses, 
I/O ports, DMA channels, and interrupt levels.
The time on this server can be set by the BIOS setup utility or the 
OS you are using.
The RTC has a certain error, and the error is increased cumula-
tively if it is remained.
To avoid the harmful influence for the operation, adjust the clock 
periodically.

The SCSI utility is to be used to set the SCSI controller of the 
SCSI riser card.

The IDE RAID Setup utility is to be used to set the IDE RAID 
controller.